The cleaning of the anchor chain is also exquisite. If it is just a perfunctory cleaning, the damage of the electric welding anchor chain will be greatly affected. Therefore, the following points should be done when cleaning:

　　 1. Clean your high-strength chain after each use, especially in rainy and humid environments.

　　 2. Be careful to use a dry cloth to wipe the high-strength chain and its accessories. If necessary, use an old toothbrush to clean the gaps between the links. Also don't forget to clean the front derailleur and the rear shift guide wheels.

　　3. Use a brush to remove the sand and dirt accumulated between the high-strength chains, if necessary, use warm soapy water to assist.

　　4. Do not use strong acid or strong alkaline cleaning agents (such as rust remover), because these chemicals will cause damage or even breakage of the high-strength chain.

　　 5. Do not use a chain washer with solvent to clean high-strength chains. This cleaning method will damage the high-strength chains.

　　 6. Avoid using organic solvents such as scouring oil, which will not only damage the environment but also wash off the lubricating oil in the bearing parts. Clean your high-strength chain after each ride, especially in rainy and humid environments.

　　7. Be careful to use a dry cloth to wipe the high-strength chain and its accessories. If necessary, use an old toothbrush to clean the gaps between the links. Also don't forget to clean the front derailleur and the rear shift guide wheels.

　　 8. Use a brush to remove the sand and dirt accumulated between the high-strength chains, if necessary, use warm soapy water to assist. Do not use strong acid or strong alkaline cleaning agents (such as rust remover), because these chemicals can cause damage or even breakage of the high-strength chain.